Industrial filters and filter elements
We supply industrial filters and replacement filter elements for air, dust and liquids: filter bags and cartridges for dust collectors, air filters for ventilation and cleanrooms, hydraulic filters, liquid filter cartridges and filter housings for water, oils and process liquids. We match a filter by dimensions, sample or the part number of your existing element, and supply custom-made filters for your equipment.
Dust collector filter bags and cartridges
Replacement filter elements for baghouses, cartridge dust collectors and pulse-jet dedusting systems. Used in pharmaceutical, food, chemical and cosmetics production, on tablet presses and powder filling lines, in woodworking, metallurgy, cement and dry-mix plants.


Dust collector cartridges
- Oval cartridges
- Pleated bag filters (pleated elements that replace conventional bags)
- Gas turbine filter cartridges
- High-temperature cartridges
- Pulse-jet cartridges with 3 or 4 lugs
- Square end cap cartridges
- Twist-lock cartridges
- Threaded and two-bolt cartridges
- Bracket-mounted cartridges
- Flat (panel) cartridges
Filter bags by material
- Polyester (PES) — up to ≈150 °C, the all-round choice for dry dust
- Polypropylene (PP) — up to ≈90 °C, resistant to acids and alkalis
- Homopolymer acrylic (PAN) — up to ≈125 °C, for humid gases
- Polyphenylene sulphide PPS (Ryton) — up to ≈190 °C, for aggressive flue gases
- Meta-aramid (Nomex) — up to ≈200 °C
- Polyimide (P84) — up to ≈240 °C
- Antistatic bags — for explosive dust
Bags and cartridges are made to the dimensions of your existing filter: diameter, length, bottom and fixing type, media and weight, finish (PTFE membrane, water- and oil-repellent treatment, antistatic).
Air filters for ventilation and cleanrooms
Filters for every stage of air cleaning in air handling units, air conditioning, cleanrooms and process areas: from G3–G4 coarse pre-filters through M5–F9 fine filters to high-efficiency HEPA and ULPA filters in classes E10–U17.



Pre-filtration and fine filtration
- Filter media rolls G3, G4, M5, activated carbon media, polyurethane foam
- G3–G4 panel filters, polyurethane and metal mesh panel filters
- Pocket (bag) filters G3–G4, M5–M6, F7–F8, F9
- Compact filters, header-type panel filters, minipleat filters
- Activated carbon filters: granular carbon cartridges, panel and compact types
HEPA and ULPA filters
- HEPA filters in MDF, aluminium or galvanised steel frames, 78, 149 and 292 mm deep
- Gel seal HEPA filters
- V-bank compact filters in classes M5–F9 and E10–U17
- HEPA boxes and hooded-type filters
- Fan filter units (FFU)
- Filter mounting frames
Filters are available in standard and non-standard sizes. To match one we need the dimensions (width × height × depth), filter class and the number of pockets or frame type.
Filter cartridges for liquids, oils and compressed air
Replacement cartridges and filter bags for liquid filter housings, plus filter elements for industrial oils and compressor equipment.



Range
- Stainless steel cartridges (mesh and perforated), washable and reusable
- Pleated filter cartridges
- String wound and melt-blown (spun) polypropylene cartridges
- Liquid filter bags
- Industrial oil filters
- Filter elements for air dryers and compressed air lines
- Air/oil separators for screw compressors
Typical applications
- Water and process solution treatment
- Filtration of syrups, edible oils, beverages and liquid foods
- Paints, varnishes, solvents and chemical reagents
- Cleaning of oils and metalworking fluids
- Compressed air treatment
Cartridges are made in standard lengths and end fittings or to a sample. Tell us the length, diameter, micron rating, end cap type and the liquid.
Liquid filter housings
Bag and cartridge filter housings, strainers and filtration systems for water, syrups, oils, solutions, paints and chemicals. Built in stainless steel, carbon steel or plastic to suit the pressure, flow rate and hygiene requirements of your process.
Bag and cartridge housings
- Basket filter housings
- Single bag filter housings
- Multi-bag filter housings
- Parallel (duplex) bag filter housings — change a bag without stopping the line
- Serial bag filter housings — staged filtration
- Single and multi-cartridge filter housings
- Plastic filter housings
Strainers and systems
- Line filters
- Y-type and T-type strainers
- Hydrocyclone separators
- Cooling tower filtration systems
- Drum filters
A housing is selected by flow rate, working pressure and temperature, filtration rating, connection type and a material compatible with the liquid.
Hydraulic filters
Filters and replacement elements for the hydraulic systems of presses, injection moulding machines, packaging, process and mobile equipment. Clean oil means longer life for pumps, valves and cylinders.
Range
- Pressure line filters and elements
- Return line filters
- Suction line filters
Finding an equivalent
- By the part number of the original element
- By dimensions: length, outer and inner diameter, seal type
- By filtration rating and media (glass fibre, wire mesh, cellulose)
If the original element is expensive or has a long lead time, we can offer an interchangeable equivalent based on a sample or drawing.
How to specify an industrial filter
To get a quotation quickly, send us:
- A photo of the filter and its label or marking
- Dimensions: length and diameter, or width × height × depth
- Fixing or end fitting type
- Medium: dust, air, water, oil, chemicals
- Temperature and pressure
- Filter class or micron rating
- The machine the filter is installed in
- Quantity required
Filters are consumables, so we recommend keeping at least one replacement set in stock so that planned maintenance never stops production.
Industrial filters: frequently asked questions
Where can I buy baghouse filter bags or dust collector cartridges?
You can order replacement filter bags, baghouse filters and dust collector cartridges from us. Send the diameter, length, media and quantity, or a photo of the filter nameplate, and we will match the right element.
What is the price of a dust collector filter, HEPA filter or hydraulic filter?
The price depends on size, media, filter class and quantity, so there is no fixed price list: we calculate the cost for each enquiry and send a quotation.
What is the difference between HEPA and ULPA filters?
HEPA filters cover classes E10–H14 and are used in cleanrooms, pharmaceutical and food production. ULPA filters, classes U15–U17, give an even higher level of air cleaning.
Which air filter do I need for ventilation: a pre-filter or a fine filter?
Most systems use several stages: a G3–G4 pre-filter (panel filter), then an F7–F9 pocket or bag filter for fine filtration, and a HEPA filter for clean zones. We can suggest a filter sequence for your cleanliness class.
Can you supply custom-made or non-standard size filters?
Yes. Custom filters are made to a sample, drawing or dimensions: filter bags, pleated cartridges, water and oil filter elements, compressor filters and air handling unit filters.
Can an original filter element be replaced with an equivalent?
Yes, a replacement filter element is matched by part number or dimensions. This works for hydraulic filters, oil filters, compressor air/oil separators and dust collector cartridges without losing filtration performance.
Need filters or filter elements?
Send us a photo, dimensions or the part number of your filter — we will find a match and send you a quotation.
