Spare parts and tooling for Chinese tablet presses
Chinese tablet presses are built by dozens of factories under similar series names — ZP, ZPY, GZPK, TDP and others. AT Engineering supplies punches and dies, spare parts and wear-part kits for them. Because dimensions differ between manufacturers, we identify parts by photo, dimensions or sample.
Chinese tablet press series
- ZP: ZP-5, ZP-7, ZP-9A, ZP-21, ZP-27D, ZP-29D, ZP-35D, ZP-41D, ZP-25/55D
- ZPY: ZPY-100 and other double-sided rotary presses
- ZPW / ZPG: ZPW-21, ZPG-9A
- GZPK: GZPK-26, GZPK-32, GZPK-40, GZPK-50, GZPK620, GZPK720
- GZPL / GZPLS: GZPL-370, GZPLS-26, GZPLS-40, GZPLS-1100
- GZPS: double-sided high-speed presses with 49, 61, 73 and 79 stations
- GZPT / GZPTS: GZPT-26, GZPT-32, GZPT-40, GZPT-45
- HZP rotary tablet presses
- Single-punch: TDP-1.5, TDP-5, TDP-6, THP, DP-12, DP30A
If your model is not listed, send a photo of the machine nameplate and we will check compatibility.
What we supply
- Tooling: D, B, BB and non-standard punches and dies for your press, tooling for single-punch presses, anti-sticking coatings
- Compression parts: pressure rollers, cams and guides, punch seals
- Feeding: feeders, scrapers, hoppers
- Mechanics: bearings, worm gears, shafts, bellows
Service and modernisation
We also carry out repair, modernisation and maintenance of tablet presses, and manufacture parts from samples.
FAQ
Will standard tooling fit a Chinese tablet press?
Often, but not always: different factories use IPT/EU standards or their own dimensions. Send a photo of the nameplate and the dimensions of an old punch — we will select or manufacture the tooling.
What if the press manufacturer cannot be identified?
The part can be made from a sample or measurements. A photo and the main dimensions are enough to start.
Do you make tooling for TDP and THP single-punch presses?
Yes, we make punches and dies to your tablet drawing, including salt, food and technical tablets.
Need spare parts or tooling?
Send the machine model, a nameplate photo or a part photo — we will identify the part and send a quotation.
See also
ZP, ZPY, GZPK, TDP and others are series designations used by various manufacturers. AT Engineering is not a representative of the manufacturers; the designations are used only to indicate compatibility.